ASTM C204
E980652
UNEXPLORED
ASTM C204 is a standard test method published by ASTM International that specifies procedures for determining the fineness of hydraulic cement using an air-permeability apparatus.
All labels observed (1)
| Label | Occurrences |
|---|---|
| ASTM C204 canonical | 1 |
How this entity was disambiguated
This entity first appeared as the object of triple T12435066 — resolving that mention is where its identity was fixed. The disambiguator weighed these candidate entities and picked the highlighted one (or “None”, minting a new entity). This is how homonymy is resolved: the same surface form can point to different entities.
NED1
Entity disambiguation (via context triple)
gpt-5-mini-2025-08-07
Target entity: ASTM C204 Context triple: [ASTM Committee C01 on Cement, responsibleFor, ASTM C204]
-
A.
ASTM C1157
ASTM C1157 is a performance-based standard specification for hydraulic cement that classifies and evaluates cements by their strength and durability characteristics rather than by composition.
-
B.
ASTM C94
ASTM C94 is a standard specification that governs the requirements and performance of ready-mixed concrete used in construction.
-
C.
ASTM C595
ASTM C595 is a standard specification issued by ASTM International that defines requirements for blended hydraulic cements used in concrete and other construction applications.
-
D.
ASTM C618
ASTM C618 is a standard specification that defines the requirements for coal fly ash and raw or calcined natural pozzolans used as supplementary cementitious materials in concrete.
-
E.
ASTM C33
ASTM C33 is a standard specification that defines the quality and grading requirements for fine and coarse aggregates used in concrete construction.
- F. None of above. chosen
- G. Unsure - the case is ambiguous/there is not enough information to decide.
NED2
Entity disambiguation (via description)
gpt-5-mini-2025-08-07
Target entity: ASTM C204 Target entity description: ASTM C204 is a standard test method published by ASTM International that specifies procedures for determining the fineness of hydraulic cement using an air-permeability apparatus.
-
A.
ASTM C1157
ASTM C1157 is a performance-based standard specification for hydraulic cement that classifies and evaluates cements by their strength and durability characteristics rather than by composition.
-
B.
ASTM C94
ASTM C94 is a standard specification that governs the requirements and performance of ready-mixed concrete used in construction.
-
C.
ASTM C595
ASTM C595 is a standard specification issued by ASTM International that defines requirements for blended hydraulic cements used in concrete and other construction applications.
-
D.
ASTM C618
ASTM C618 is a standard specification that defines the requirements for coal fly ash and raw or calcined natural pozzolans used as supplementary cementitious materials in concrete.
-
E.
ASTM C33
ASTM C33 is a standard specification that defines the quality and grading requirements for fine and coarse aggregates used in concrete construction.
- F. None of above. chosen
Referenced by (1)
Full triples — surface form annotated when it differs from this entity's canonical label.