10BASE-T1S
E459771
10BASE-T1S is an Ethernet physical layer standard designed for short-reach, single-pair cabling that supports multi-drop networks and is optimized for automotive and industrial applications.
All labels observed (1)
| Label | Occurrences |
|---|---|
| 10BASE-T1S canonical | 1 |
How this entity was disambiguated
This entity first appeared as the object of triple T4633517 — resolving that mention is where its identity was fixed. The disambiguator weighed these candidate entities and picked the highlighted one (or “None”, minting a new entity). This is how homonymy is resolved: the same surface form can point to different entities.
NED1
Entity disambiguation (via context triple)
gpt-5-mini-2025-08-07
Target entity: 10BASE-T1S Context triple: [IEEE 802.3bu, compatibleWith, 10BASE-T1S]
-
A.
10GBASE-T
10GBASE-T is an Ethernet standard for transmitting 10 gigabits per second over twisted-pair copper cabling, commonly used for high-speed local area networks.
-
B.
100BASE‑TX
100BASE‑TX is a Fast Ethernet standard that delivers 100 Mbps data transmission over twisted-pair copper cabling, commonly used in local area networks.
-
C.
1000BASE-CX
1000BASE-CX is a short-distance copper-based Gigabit Ethernet standard that uses shielded balanced cabling for high-speed connections, typically within equipment racks or wiring closets.
-
D.
10BASE-T
10BASE-T is an early Ethernet standard that transmits data at 10 Mbps over twisted-pair copper cabling using a star topology.
-
E.
100BASE-T4
100BASE-T4 is a Fast Ethernet standard that enables 100 Mbps data transmission over Category 3 copper cabling using four twisted pairs.
- F. None of above. chosen
- G. Unsure - the case is ambiguous/there is not enough information to decide.
NED2
Entity disambiguation (via description)
gpt-5-mini-2025-08-07
Target entity: 10BASE-T1S Target entity description: 10BASE-T1S is an Ethernet physical layer standard designed for short-reach, single-pair cabling that supports multi-drop networks and is optimized for automotive and industrial applications.
-
A.
10GBASE-T
10GBASE-T is an Ethernet standard for transmitting 10 gigabits per second over twisted-pair copper cabling, commonly used for high-speed local area networks.
-
B.
100BASE‑TX
100BASE‑TX is a Fast Ethernet standard that delivers 100 Mbps data transmission over twisted-pair copper cabling, commonly used in local area networks.
-
C.
1000BASE-CX
1000BASE-CX is a short-distance copper-based Gigabit Ethernet standard that uses shielded balanced cabling for high-speed connections, typically within equipment racks or wiring closets.
-
D.
10BASE-T
10BASE-T is an early Ethernet standard that transmits data at 10 Mbps over twisted-pair copper cabling using a star topology.
-
E.
100BASE-T4
100BASE-T4 is a Fast Ethernet standard that enables 100 Mbps data transmission over Category 3 copper cabling using four twisted pairs.
- F. None of above. chosen
Statements (47)
| Predicate | Object |
|---|---|
| instanceOf |
Ethernet physical layer standard
ⓘ
IEEE 802.3 standard ⓘ |
| applicationDomain |
building automation
ⓘ
factory automation ⓘ in-vehicle networks ⓘ process control ⓘ |
| backwardsCompatibleWith | higher-layer Ethernet protocols ⓘ |
| belongsToFamily | 10BASE-T1 ⓘ |
| category | single-pair Ethernet standard ⓘ |
| compatibleWith | single-pair Ethernet (SPE) ecosystem ⓘ |
| dataRate | 10 Mbit/s ⓘ |
| definedIn | IEEE 802.3cg-2019 NERFINISHED ⓘ |
| distinguishedBy |
multi-drop capability
ⓘ
short-reach focus ⓘ use of PLCA for collision avoidance ⓘ |
| distinguishedFrom | 10BASE-T1L ⓘ |
| enables | IP-based communication over single-pair cabling ⓘ |
| feature |
EMC-robust signaling for noisy environments
ⓘ
Physical Layer Collision Avoidance (PLCA) NERFINISHED ⓘ low power consumption ⓘ low-cost cabling ⓘ short-reach communication ⓘ |
| goal |
enable cost-effective Ethernet to the edge of networks
ⓘ
replace legacy fieldbuses with Ethernet ⓘ |
| introduced | 2019 ⓘ |
| lineCoding | PAM3 ⓘ |
| mediaType | balanced copper pair ⓘ |
| optimizedFor |
automotive applications
ⓘ
industrial applications ⓘ |
| OSIlayer | physical layer ⓘ |
| partOf | IEEE 802.3cg NERFINISHED ⓘ |
| reach |
up to 1000 m in point-to-point mode (with appropriate PHYs and cabling)
ⓘ
up to 15 m in some multi-drop configurations ⓘ up to 25 m in multi-drop mode ⓘ |
| standardizedBy | IEEE NERFINISHED ⓘ |
| supports |
deterministic access via PLCA
ⓘ
full-duplex operation ⓘ half-duplex operation ⓘ multi-drop segment with multiple nodes ⓘ multiple nodes on a single segment ⓘ up to at least 8 nodes on a multi-drop segment (implementation-dependent) ⓘ |
| topologySupport |
multi-drop
ⓘ
point-to-point ⓘ |
| usedFor |
sensor and actuator connectivity
ⓘ
zonal architectures in vehicles ⓘ |
| uses | DC-coupled transmission ⓘ |
| usesMedium | single balanced pair of conductors ⓘ |
How these facts were elicited
The pipeline generated the facts above by prompting gpt-5.1 with this entity's name + description and the instruction below.
Instruction
You are a knowledge base construction expert. Given a subject entity and a description of it, return factual statements that you know for the subject as a JSON list of dictionaries(triples), where keys must be "subject", "predicate" and "object". The number of facts may be very high, between 25 to 50 or more, for very popular subjects. For less popular subjects, the number of facts can be very low, like 5 or 10. # Requirements - If you don't know the subject at all, return an empty list. - If the subject is not a named entity, return an empty list. - Include at least one triple where predicate is "instanceOf". - Do not get too wordy. - Separate several objects into multiple triples with one object.
Input
Subject: 10BASE-T1S Description of subject: 10BASE-T1S is an Ethernet physical layer standard designed for short-reach, single-pair cabling that supports multi-drop networks and is optimized for automotive and industrial applications.
Referenced by (1)
Full triples — surface form annotated when it differs from this entity's canonical label.