100BASE-FX
E17579
100BASE-FX is a Fast Ethernet standard that uses fiber-optic cabling to provide 100 Mbps full-duplex or half-duplex network connections over longer distances than copper-based variants.
All labels observed (2)
| Label | Occurrences |
|---|---|
| Fiber Optic Inter-Repeater Link | 2 |
| 100BASE-FX canonical | 1 |
How this entity was disambiguated
This entity first appeared as the object of triple T139622 — resolving that mention is where its identity was fixed. The disambiguator weighed these candidate entities and picked the highlighted one (or “None”, minting a new entity). This is how homonymy is resolved: the same surface form can point to different entities.
Target entity: 100BASE-FX Context triple: [IEEE 802.3, defines, 100BASE-FX]
-
A.
10BASE-FL
10BASE-FL is an Ethernet standard for 10 Mbps data transmission over fiber-optic cabling, commonly used for longer-distance network links.
-
B.
10GBASE-T
10GBASE-T is an Ethernet standard for transmitting 10 gigabits per second over twisted-pair copper cabling, commonly used for high-speed local area networks.
-
C.
10BASE2
10BASE2 is an older Ethernet standard that uses thin coaxial cable to provide 10 Mbps networking over relatively short distances in a bus topology.
-
D.
IEEE 802.3at
IEEE 802.3at is a Power over Ethernet (PoE+) standard that increases the power available to networked devices beyond the original PoE specification, enabling support for more demanding equipment such as PTZ cameras and wireless access points.
-
E.
RJ45
RJ45 is a standardized 8-pin modular connector commonly used for terminating Ethernet network cables in computer and telecommunications networking.
- F. None of above. chosen
- G. Unsure - the case is ambiguous/there is not enough information to decide.
Target entity: 100BASE-FX Target entity description: 100BASE-FX is a Fast Ethernet standard that uses fiber-optic cabling to provide 100 Mbps full-duplex or half-duplex network connections over longer distances than copper-based variants.
-
A.
10BASE-FL
10BASE-FL is an Ethernet standard for 10 Mbps data transmission over fiber-optic cabling, commonly used for longer-distance network links.
-
B.
10GBASE-T
10GBASE-T is an Ethernet standard for transmitting 10 gigabits per second over twisted-pair copper cabling, commonly used for high-speed local area networks.
-
C.
10BASE2
10BASE2 is an older Ethernet standard that uses thin coaxial cable to provide 10 Mbps networking over relatively short distances in a bus topology.
-
D.
IEEE 802.3at
IEEE 802.3at is a Power over Ethernet (PoE+) standard that increases the power available to networked devices beyond the original PoE specification, enabling support for more demanding equipment such as PTZ cameras and wireless access points.
-
E.
RJ45
RJ45 is a standardized 8-pin modular connector commonly used for terminating Ethernet network cables in computer and telecommunications networking.
- F. None of above. chosen
Statements (46)
| Predicate | Object |
|---|---|
| instanceOf |
Fast Ethernet standard
ⓘ
IEEE 802.3 physical layer specification ⓘ |
| belongsToFamily | Fast Ethernet ⓘ |
| belongsToSeries | 100BASE-X ⓘ |
| category | optical Ethernet standard ⓘ |
| collisionDomainLimit | 400 m in half-duplex ⓘ |
| connectorType |
SC connector
ⓘ
ST connector ⓘ |
| dataRate | 100 Mbit/s ⓘ |
| introducedAs | fiber-based variant of 100BASE-X ⓘ |
| isAlternativeTo |
100BASE-T4
ⓘ
100BASE-TX ⓘ |
| isDefinedBy |
Institute of Electrical and Electronics Engineers
ⓘ
surface form:
IEEE
|
| isPartOf |
IEEE 802.3 Ethernet standard
ⓘ
surface form:
IEEE 802.3
|
| isSuccessorOf | 10BASE-F ⓘ |
| isUsedIn |
media converters
ⓘ
router interfaces ⓘ switch uplinks ⓘ |
| layer | physical layer ⓘ |
| mediaType | fiber ⓘ |
| nominalWavelength | 1300 nm ⓘ |
| receiveFiberCount | 1 ⓘ |
| requires | fiber transceiver ⓘ |
| standardizedIn |
100BASE‑TX
ⓘ
surface form:
IEEE 802.3u
|
| standardType | wired Ethernet ⓘ |
| supports | collision detection in half-duplex ⓘ |
| supportsApplication |
building-to-building links
ⓘ
campus backbone links ⓘ industrial networking ⓘ telecommunications access networks ⓘ |
| supportsAutoNegotiation | no ⓘ |
| supportsDistance |
up to 2 km in full-duplex
ⓘ
up to 400 m in half-duplex ⓘ |
| supportsDuplexMode |
full-duplex
ⓘ
half-duplex ⓘ |
| supportsFrameType |
IEEE 802.3 Ethernet standard
ⓘ
surface form:
IEEE 802.3 Ethernet frames
|
| supportsTopology |
point-to-point
ⓘ
star topology ⓘ |
| totalFiberStrands | 2 ⓘ |
| transmitFiberCount | 1 ⓘ |
| uses | separate fibers for transmit and receive ⓘ |
| usesEncoding | 4B5B ⓘ |
| usesLineCode | NRZI ⓘ |
| usesMedium |
fiber-optic cable
ⓘ
multimode fiber ⓘ |
| usesPhysicalLayer | fiber-optic PHY ⓘ |
How these facts were elicited
The pipeline generated the facts above by prompting gpt-5.1 with this entity's name + description and the instruction below.
You are a knowledge base construction expert. Given a subject entity and a description of it, return factual statements that you know for the subject as a JSON list of dictionaries(triples), where keys must be "subject", "predicate" and "object". The number of facts may be very high, between 25 to 50 or more, for very popular subjects. For less popular subjects, the number of facts can be very low, like 5 or 10. # Requirements - If you don't know the subject at all, return an empty list. - If the subject is not a named entity, return an empty list. - Include at least one triple where predicate is "instanceOf". - Do not get too wordy. - Separate several objects into multiple triples with one object.
Subject: 100BASE-FX Description of subject: 100BASE-FX is a Fast Ethernet standard that uses fiber-optic cabling to provide 100 Mbps full-duplex or half-duplex network connections over longer distances than copper-based variants.
Referenced by (3)
Full triples — surface form annotated when it differs from this entity's canonical label.